Du vet väl om att du kan få din beställning levererad till de tävlingar vi besöker?
Vill du att vi kommer till just Din skytteklubbs tävling? Kontakta oss så kollar vi om detta är möjligt.
Klicka här för mer information.
Spuhr
Spuhr A-0010 Trijicon RMR Interface
575 SEK
Interface for attaching Trijicon RMR Type 1 and 2 and Trijicon SRO to an ISMS scope mount. Includes shim plate and screws.
The A-0010 footprint also matches the following, though screw sizing may vary:
• Trijicon RMR
• Trijicon SRO
• Holosun HS407C
• Holosun HS507C
• Holosun HS508T
Height: 9.5 mm/.374"
Weight: 21 g/0.7 oz
Note: Will not fit Hunting Series mounts and rings - use H-0010 instead. Please note that the two pins are designed to be used together with the included shim plate - if the shim plate is left out the pins may bottom out in sight.
- Trygga och säkra betalningsalternativ.
- Vid frågor, ring eller maila oss.
- info@jaktochsportskytte.se
- 0563 - 32 45 45
Beskrivning
Art.nr: A-0010
Interface for attaching Trijicon RMR Type 1 and 2 and Trijicon SRO to an ISMS scope mount. Includes shim plate and screws.
The A-0010 footprint also matches the following, though screw sizing may vary:
• Trijicon RMR
• Trijicon SRO
• Holosun HS407C
• Holosun HS507C
• Holosun HS508T
Height: 9.5 mm/.374"
Weight: 21 g/0.7 oz
Note: Will not fit Hunting Series mounts and rings - use H-0010 instead. Please note that the two pins are designed to be used together with the included shim plate - if the shim plate is left out the pins may bottom out in sight.
The A-0010 footprint also matches the following, though screw sizing may vary:
• Trijicon RMR
• Trijicon SRO
• Holosun HS407C
• Holosun HS507C
• Holosun HS508T
Height: 9.5 mm/.374"
Weight: 21 g/0.7 oz
Note: Will not fit Hunting Series mounts and rings - use H-0010 instead. Please note that the two pins are designed to be used together with the included shim plate - if the shim plate is left out the pins may bottom out in sight.