0
Varukorg

Du vet väl om att du kan få din beställning levererad till de tävlingar vi besöker?

Vill du att vi kommer till just Din skytteklubbs tävling? Kontakta oss så kollar vi om detta är möjligt. 

Klicka här för mer information.

DAA Magnet with M5 screw for Alpha-Xi/X and Race Master Pouch
DAA

DAA Magnet with M5 screw for Alpha-Xi/X and Race Master Pouch

255 SEK
Lägg till i favoritlistan
Due to popular demand we are now pleased to offer you the DAA Super-Strong magnets, sold separately, for mounting on the DAA Race Master pouches, or any other type of base you care to use them on. These Zinc plated magnets are incredibly strong, offering approx. 87kg of pull strength. With these magnets, you can slap on that magazine quickly and confidently and know that it will not fall off as you move. The magnets measure almost 50mm in diameter, and are 12mm thick (with their casing). 

Fitting to a Race Master Pouch: In the front of the pouch there is a 4.2mm hole, which can be used to attach the magnet to the pouch body. You will need to tap (thread) this hole using an M5 Tap.
Do it carefully and slowly as the thread needs to be precise, as there is only a 2.5mm side wall to work with. once done, simply screw the magnet directly onto the front of your leading pouch. We suggest using a little LockTite on it, to keep the screw from opening.

Do not worry if the tip of the screw protrudes slightly into the pouch body - the magazine does not reach down far enough to hit it.
Läs mer...

I lager: 6

    Beskrivning

    Art.nr: 101094

    Due to popular demand we are now pleased to offer you the DAA Super-Strong magnets, sold separately, for mounting on the DAA Race Master pouches, or any other type of base you care to use them on. These Zinc plated magnets are incredibly strong, offering approx. 87kg of pull strength. With these magnets, you can slap on that magazine quickly and confidently and know that it will not fall off as you move. The magnets measure almost 50mm in diameter, and are 12mm thick (with their casing). 

    Fitting to a Race Master Pouch: In the front of the pouch there is a 4.2mm hole, which can be used to attach the magnet to the pouch body. You will need to tap (thread) this hole using an M5 Tap.
    Do it carefully and slowly as the thread needs to be precise, as there is only a 2.5mm side wall to work with. once done, simply screw the magnet directly onto the front of your leading pouch. We suggest using a little LockTite on it, to keep the screw from opening.

    Do not worry if the tip of the screw protrudes slightly into the pouch body - the magazine does not reach down far enough to hit it.

    Tillbaka till toppen