Du vet väl om att du kan få din beställning levererad till de tävlingar vi besöker?
Vill du att vi kommer till just Din skytteklubbs tävling? Kontakta oss så kollar vi om detta är möjligt.
Klicka här för mer information.
Arisaka Rail Slider Barricade Stop
The Rail Slider Barricade Stop is an ARMS 17S compatible meat tenderizer and QD sling swivel socket which is sandwiched between the Arisaka Rail Slider and your bipod. The pointy end has plenty of bite to provide additional stability against the edge of walls, doors, or any suitable barricade. The addition of a QD sling swivel socket on the rear allows for your sling to follow the positioning of the bipod and barricade stop along the length of the picatinny rail. Additionally, it allows you to use the rail slider to shorten or lengthen the sling independently from the sling's own length adjustment.
Dimensions: 1" H x 0.7" W x 3.62" L (Increases bipod height by only 0.2")
Weight: 1.0 oz.
The Rail Slider Barricade Stop is CNC machined from 6061-T651 aluminum and MIL-A-8625 Type III hard coat anodized. Requires a 5/32 Allen wrench for installation (not included).
Hardware: Two 10-32x5/8" socket head cap screws.
- Trygga och säkra betalningsalternativ.
- Vid frågor, ring eller maila oss.
- info@jaktochsportskytte.se
- 0563 - 32 45 45
Beskrivning
Art.nr: ARISAKA-RS-BARRICADE-STOP
The Rail Slider Barricade Stop is an ARMS 17S compatible meat tenderizer and QD sling swivel socket which is sandwiched between the Arisaka Rail Slider and your bipod. The pointy end has plenty of bite to provide additional stability against the edge of walls, doors, or any suitable barricade. The addition of a QD sling swivel socket on the rear allows for your sling to follow the positioning of the bipod and barricade stop along the length of the picatinny rail. Additionally, it allows you to use the rail slider to shorten or lengthen the sling independently from the sling's own length adjustment.
Dimensions: 1" H x 0.7" W x 3.62" L (Increases bipod height by only 0.2")
Weight: 1.0 oz.
The Rail Slider Barricade Stop is CNC machined from 6061-T651 aluminum and MIL-A-8625 Type III hard coat anodized. Requires a 5/32 Allen wrench for installation (not included).
Hardware: Two 10-32x5/8" socket head cap screws.