Du vet väl om att du kan få din beställning levererad till de tävlingar vi besöker?
Vill du att vi kommer till just Din skytteklubbs tävling? Kontakta oss så kollar vi om detta är möjligt.
Klicka här för mer information.
Arisaka Rail Slider STAB
The Rail Slider STAB, or Stand Alone Barricade Stop, is designed to be used with the Arisaka Rail Slider without a bipod. It features the same front serrated face as the Rail Slider Barricade Stop and Barricade Stop M-Lok, and also has a rear facing QD swivel socket.
The combination of the STAB with the Rail Slider provides a barricade stop that can be quickly moved to whichever side of the rifle provides optimal contact with a wall, doorframe, or other suitable surface, and adjusted fore or aft with a simple push of a button.
The STAB does NOT include a Rail Slider. The Rail Slider must be purchased separately.
Dimensions: 1" H x 0.75" W x 2.77" L
Weight: 1.1 oz alone, 3.3 oz total with Rail Slider.
The STAB is CNC machined from 6061-T651 aluminum and MIL-A-8625 Type III hard coat anodized. Requires a 5/32 Allen wrench for installation (not included). Recommended torque: 30 inch lbs.
Hardware: Two 10-32x5/16" socket head cap screws.
- Trygga och säkra betalningsalternativ.
- Vid frågor, ring eller maila oss.
- info@jaktochsportskytte.se
- 0563 - 32 45 45
Beskrivning
Art.nr: ARISAKA-RS-STAB
The Rail Slider STAB, or Stand Alone Barricade Stop, is designed to be used with the Arisaka Rail Slider without a bipod. It features the same front serrated face as the Rail Slider Barricade Stop and Barricade Stop M-Lok, and also has a rear facing QD swivel socket.
The combination of the STAB with the Rail Slider provides a barricade stop that can be quickly moved to whichever side of the rifle provides optimal contact with a wall, doorframe, or other suitable surface, and adjusted fore or aft with a simple push of a button.
The STAB does NOT include a Rail Slider. The Rail Slider must be purchased separately.
Dimensions: 1" H x 0.75" W x 2.77" L
Weight: 1.1 oz alone, 3.3 oz total with Rail Slider.
The STAB is CNC machined from 6061-T651 aluminum and MIL-A-8625 Type III hard coat anodized. Requires a 5/32 Allen wrench for installation (not included). Recommended torque: 30 inch lbs.
Hardware: Two 10-32x5/16" socket head cap screws.